Volpato Profile Sander for Panel edges, model LS 1R3N

Working Units: One profile shaper, 3 profile sanding belts.
Dimensions 3600mm length x 1250mm h x 1820mm w
Feed speed variable 5-30mt/min
Max working thickness 130mm
 
Shaper head
Max dia. 160mm
Head rotation 90 degrees
Variable speed by inverter up to 7,200rpm
Electronic brake
2.2kw power
35mm shaft
Air blower
 
Profile belt sanders (3)
Belt dimensions 80 x 2450mm
Angle 135 degrees
Abrasive belt 2 speed 7-14 mt/sec
1-1.5kw power
Timed entry and exit of the pad
Air blower cleaning of the belt
240/3/60 electrics 10kw total power
Weight 1350kg

Refurbished Air Handling Fan

Whirlwind model 1000 L Up-cut Chop saw

Made in USA
2-3/16”  x  8-1/4” cutting capacity
Left hand version, feeding material from right to left
Foot-pedal controlled pneumatic clamp and cut operation
220/3/60 electrics

HOMAG KAL 210/7/A20/S2  ... Production Edgebander with Pre-Milling & Corner Rounding (4) Motor: Refurbished and upgraded in 2018.

In addition to the standard EVA glue system the owner purchased new PUR equipment consisting of:             
Glue Pot, Nordson Pur-Blu Melter, 6 Rieppe application units to apply release ,anti-stick, anti-static and cleaning agent and the Nitrogen/PUR Gluepot Storage Tank system.
Value new Can $50,000

The machine was used for door and typical cabinet parts, and could apply the PUR for today’s seamless glue lines.
Setup with 2 gluepots, Standard and a Teflon coated… allowing it to deliver EVA, Polyolefin or PUR.

Homag Edgebander Specifications.
Working Capacity:
Edge thickness, coiled stock min/max, 0.3 - 3 mm  (0.012. - 0.112"), straight edges, min/max. 0.4 - 20 mm (0.016 - 0.788"), panel thickness min/max.  12 - 60 mm 
(0.472 - 2.362").
 
Equipped with:
•  Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) - 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments.
•  Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application.
•  Edge Magazine Combination:  Strip processing and (2) - coil vertical magazine for quick coil changeover.
•  Gluing System A 20:  EVA (Hot Melt), Quick Melt hopper feeder & roller applicator (reversible).
•  Pressure Section "C":  Servo controlled with (1) Large 150 mm dia. driven & (6) idle rollers; automatic servo adjusting pressure zone through program for varying edge thicknesses.

Workstations:
•   End Trimming Unit HL 84:  KW 0.8 x 2 (HP 1.0 x 2) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip.
•   Rough/Pre-Trimming Unit: Top & bottom, KW 1.5 x 2 (HP 2.0 x 2) - 12,000 RPM ea. motor.  Height adjustment with the top pressure-beam and swiveling range +/- 1°.
•  Profile Trimming / Corner Rounding "FF 12" Unit: Equipped with (4) motors for fine or profile trimming upper and lower edge, as well as trimming around the front & rear edge. KW 0.4 x 4 (HP 0.54 x 4) motor ea.
•  Grooving: .2.2 Kw (3.0 HP) Grooving Unit, 90 deg. horizontal/vertical with jump control
•   Profile Scraping Unit PN 10: Top & bottom for thick PVC/ABS, pneumatically activated 
•  Flat Glue Scraper Unit: Top & bottom to remove potential glue squeeze-out.
•   Buffing Unit: Top & bottom edge polishing.

 Complete With:
•   Power Control PC 22: Controller functions in Windows environment and features: Keypad w/LCD flat screen display, fault diagnostic, OS9 real-time operating system.
•  Variable feed-speed from 18 - 25 MPM (59 - 82 FPM); 80 mm feed track pads, and V-groove belt on top pressure beam which is motorized; motorized raising & lowering of top pressure beam through program selection.
•  Spraying Units: (1) for anti-sticking on in-feed side of the machine, (1) prior to Buffing Unit for edge polishing.  
•  Other Features: SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, standard adjustable outboard panel support.
 

Intake               27″ dia.
Outlet               22″ x 26″
Motor Baldor    EM2551T-5, nearly new motor
75hp
575/3/60

Homag Optimat KAL 310/3/A3

High speed, heavy production edge bander well maintained and working well.
Suitable for applying tape only, not for thick edging or profiled corners.
Feed speed to 30m/min
End trimmers
Top and bottom trimmers
Glue line scrapers
Buffers
New controller. Spare glue pot. 2 coil tape feed. 
480/3/60 electrics

Gannomat Concept
 
Adjustment of pressure beams is by precision trapezoidal-threaded spindles and heavy-duty machine running nut with integral grease reservoir.
Pressing of work pieces is by two separate helical geared motors (2 x 2.2kW) and electromagnetic disc brakes.
Maximum pressing force is 3,500 dN (kg) per pressure beam.
Pressing force of the pressure beams is digitally adjustable and regulated by a frequency changer, resulting in absolutely wear-free operation.  Pressing velocity 25mm/sec, adjustable to 50mm/sec, controlled by automatic work piece recognition with sensors in the laminae pressure beams.
Back-pressure plates (floor and sidewall), 40 mm thick, covered, continuous base plates
Simple handling via electronic control with LCD-display and foil keypad, with electronic pressure monitoring
136"x38"x91" dimensions
2600kg weight
220/3/60 16 amp electrics

TTF1-T2M  CUTTING- MOULDING- BORING MACHINE

TECHNICAL FEATURES :
- Sliding of table on ball blocks onto rails (Linear Motion System)
- High precision cutterholder spindles supported by angular contact bearings
- Cast iron frame
- Hydraulic control of table stroke and working units
- Machine controlled by PLC to allow any combination of the cutting-boring, moulding
operations in any sequence
- Automatic recoil of moulding unit
TECHNICAL DATA :
Cutting Unit
- Circular saw blade in carbide 400mm
- Spindle speed 3000rpm
- Motor power 3hp
Boring Unit
- Boring head with multiple spindle adjustment at 360°
- Boring depth 80mm
- Spindle Speed 3,600rpm
- Mechanical Fence and digital read-out 3hp
Moulding Unit
- Diameter of shaft 35mm
- Max. sizes of tools 160x120mm
- Spindle Speed 9,600rpm
- Motor power 7.5hp
 

M3

50hp, " inlet