 |
| Tel: |
(604) 347-7999 |
| Fax: |
(604) 800-9207 |
| |
|
| |
|
|
| robert@rwmachinery.com |
| www.rwmachinery.com |
| |
| |
|
| Box 45073 - 12851 16th Ave. |
| Surrey, BC. V4A 9L1 |
| |
|
|
|
| Inventory# |
 |
U1184
|
 |
| Machine Type |
EDGE BANDERS |
| Manufacturer |
Homag |
| Model |
KAL 210/7/A20/S2 |
| Year |
2007 |
| Region |
BC |
| Voltage |
480/3/60 |
| Condition |
Used - Excellent |
| Description |
HOMAG KAL 210/7/A20/S2 ... Production Edgebander with Pre-Milling & Corner Rounding (4) Motor: Refurbished and upgraded in 2018.
In addition to the standard EVA glue system the owner purchased new PUR equipment consisting of:
Glue Pot, Nordson Pur-Blu Melter, 6 Rieppe application units to apply release ,anti-stick, anti-static and cleaning agent and the Nitrogen/PUR Gluepot Storage Tank system.
Value new Can $50,000
The machine was used for door and typical cabinet parts, and could apply the PUR for today’s seamless glue lines.
Setup with 2 gluepots, Standard and a Teflon coated… allowing it to deliver EVA, Polyolefin or PUR.
Homag Edgebander Specifications.
Working Capacity:
Edge thickness, coiled stock min/max, 0.3 - 3 mm (0.012. - 0.112"), straight edges, min/max. 0.4 - 20 mm (0.016 - 0.788"), panel thickness min/max. 12 - 60 mm
(0.472 - 2.362").
Equipped with:
• Pre-Milling Station: Two vertical jointing spindles, KW 3.0 x 2 (HP 4.0 x 2) - 150 Hz, 9,000 RPM Motors; equipped with panel blow off device and SIKO digital counters for adjustments.
• Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application.
• Edge Magazine Combination: Strip processing and (2) - coil vertical magazine for quick coil changeover.
• Gluing System A 20: EVA (Hot Melt), Quick Melt hopper feeder & roller applicator (reversible).
• Pressure Section "C": Servo controlled with (1) Large 150 mm dia. driven & (6) idle rollers; automatic servo adjusting pressure zone through program for varying edge thicknesses.
Workstations:
• End Trimming Unit HL 84: KW 0.8 x 2 (HP 1.0 x 2) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip.
• Rough/Pre-Trimming Unit: Top & bottom, KW 1.5 x 2 (HP 2.0 x 2) - 12,000 RPM ea. motor. Height adjustment with the top pressure-beam and swiveling range +/- 1°.
• Profile Trimming / Corner Rounding "FF 12" Unit: Equipped with (4) motors for fine or profile trimming upper and lower edge, as well as trimming around the front & rear edge. KW 0.4 x 4 (HP 0.54 x 4) motor ea.
• Grooving: .2.2 Kw (3.0 HP) Grooving Unit, 90 deg. horizontal/vertical with jump control
• Profile Scraping Unit PN 10: Top & bottom for thick PVC/ABS, pneumatically activated
• Flat Glue Scraper Unit: Top & bottom to remove potential glue squeeze-out.
• Buffing Unit: Top & bottom edge polishing.
Complete With:
• Power Control PC 22: Controller functions in Windows environment and features: Keypad w/LCD flat screen display, fault diagnostic, OS9 real-time operating system.
• Variable feed-speed from 18 - 25 MPM (59 - 82 FPM); 80 mm feed track pads, and V-groove belt on top pressure beam which is motorized; motorized raising & lowering of top pressure beam through program selection.
• Spraying Units: (1) for anti-sticking on in-feed side of the machine, (1) prior to Buffing Unit for edge polishing.
• Other Features: SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, standard adjustable outboard panel support.
|
| Sales Price |
POA |
|
Terms & Conditions
RW Machinery sells used, pre-owned machinery on a first come, first served basis. Used, pre-owned machinery is not covered under any warranty. It is supplied for purchase "as-is". Descriptions and specifications are listed to the best of our knowledge (some information is communicated via 3rd-party sources). It is strongly recommended that the machinery be inspected prior to purchase to confirm the condition and specification. Additional charges such as crating, loading and delivery may apply. |
|
|
